MEWOI-DS10000IB-（2000A-10KA） (ACDC) 140,50mm Close-loop Hall current Sensor

Electricity Testing Instruments manufacturer, Support OEM/ODM, your testing specialist

Main Features：： Large Current AC/DC Hall Current Sensor

Model No.:： MEWOI-DS10000IB

Name:： MEWOI-DS10000IB-（2000A-10KA） (ACDC) 140,50mm Close-loop Hall current Sensor

Email：mewoi@mewoi.com

Whatsapp: +8618620373879

MEWOI-DS10000IB-（2000A-10KA） (ACDC) 140,50mm Close-loop Hall current Sensor

The current sensor based on the Hall Effect open-loop principle can measure DC, AC, pulse and various kinds of Irregular waveform current under electrical isolation conditions.

TECHNICIAL SPECIFICATION

Click to download: MEWOI-DS10000IB-（2000A-10KA） (ACDC) 140,50mm Close-loop Hall current Sensor

Model Number	MEWOI-DS10000IB-（2000A-10KA） (AC/DC)
Jaw Size	140*50mm
Rated input Current (IPN)	2000	3000	5000	8000	10000	A
Primary Current Measure range(IP)	0~±4000	0~±5000	0~±7500	0~±10000	0~±12000	A
Rated output voltage of secondary side	4±1%					V
Power Supply Voltage (VCC)	±12~±15(±5%)					V
Current consumption	VC=±15V <25					mA
Galvanic isolation (Vd)	6KV /50Hz/1min
Linearity (εL)	<1					%FS
Accuracy X	TA =25℃ ±1					%
Offset Voltage V0	TA=25℃ <±25					mV
Hysteresis offset Current IOM	IPN→0 <±30					mV
Offset Voltage drift VOT	IP=0 TA=-25～+85℃ <±1					mV /℃
Response time Tr	<7					μs
Operating temperature TA	-25～+85					℃
Storage temperature TS	-40～+100					℃
Frequency bandwidth(-3dB)	DC-3					KHZ
Load resistance RL	≥10k					Ω
Weight	1150					g

Matters needing attention:

The wrong connection may cause sensor damage. After the sensor is energized, the same phase voltage is measured at the output when the current wire cross the sensor center according the direction arrow indicating label.
The output range of the sensor can be adjusted according to the user's needs.
Vout is positive when the Ip flows in the direction of the arrow.

Hall Current Sensor Selection Guide

Model Number	Range	Diameter	Output	Power Supply
MEWOI-DRB1	50,100,200,300A	20mm(Close Loop)	50,100,100,150mA	DC ±12V~±15V (±5%)
MEWOI-DRK1D	50,100,200,300,400,500A(AC/DC)	21mm(Open Loop)	2.5±1.25V ( ±1%)	DC +5V (±5%)
MEWOI-DRK1	50,100,200,300,400,500A(AC/DC)	21mm(Open Loop)	4or5,4-20 mA,0-20 mA±1%	DC ±12V~±15V (±5%)
MEWOI-DRK1AC	50,100,200,300,400,500A(AC)	21mm(Open Loop)	4or5,4-20 mA,0-20 mA±1%	DC ±12V~±15V (±5%)
MEWOI DRK3D	50,100,200,300,400,500A(AC/DC)	10*20mm(Open Loop)	2.5V±1.25V ±1%	DC +5V (±5%)
MEWOI DRK3	50,100,200,300,400,500A(AC/DC)	10*20mm(Open Loop)	4or5±1%	DC ±12V- ±15V (±5%)
MEWOI DRK5	300,500,600,800,1000,1500A(AC/DC)	37*42.5mm(Open Loop)	4or5±1%	DC ±12V- ±15V (±5%)
MEWOI DRKH1	50,100,200,300,400,500A(AC/DC)	21mm(Open Loop)	4or5±1%	DC ±12V- ±15V (±5%)
MEWOI DRKH2	300,400,600,800,1000,2000A(AC/DC)	40.5mm(Open Loop)	4or5±1%	DC ±12V- ±15V (±5%)
MEWOI DRKH4	600,800,1000,2000,2500,3000A(AC/DC)	80mm(Open Loop)	4or5±1%	DC ±12V- ±15V (±5%)
MEWOI DRKH5	600,1000,2000,3000,5000A(AC/DC)	42*400mm(Open Loop)	4±1%	DC ±12V- ±15V (±5%)
	1000,3000,5000,8000A,10000A(AC/DC)	140*36mm(Open Loop)	4±1%	DC ±15V (±5%)
MEWOI DS8000DKL	10000,20000,30000,40000,60000A,80000A(AC/DC)	120mm(Open Loop)	4or5±1%	DC ±12V- ±15V (±5%)
MEWOI DS4000IAX	500,800,1000,1500,2500A,4000A(AC/DC)	64*21mm(Open Loop)	4±1%	DC ±15V (±5%)
MEWOI DS1500DFA	200,400,600,800,1000A,1500A(AC/DC)	40*30.2mm(Open Loop)	4±1%	DC ±15V (±5%)
MEWOI DS20000IC	5000,7500,10000,15000,20000A,(AC/DC)	210*100mm(Close Loop)	4±1%	DC ±12V- ±15V (±5%)
MEWOI DS10000IB	2000,3000,5000,8000,10000A,(AC/DC)	140*50mm(Close Loop)	4±1%	DC ±12V- ±15V (±5%)

label: Hall current sensor