| Contact Us for Quotation | Email：mewoi@mewoi.com | Whatsapp: +8618620373879 |
Ⅰ.INTRODUCTION
Click to download: Selection Map
| MEWOI117BE AC/DC Clamp Leakage Current Sensor is designed for measuring AC/DC current and leakage current under 600V line voltage, by adopting the latest CT technology and digital integrate technology. The small clamp is suitable for line densely places (electric power measurement system, the high speed rail system, car circuit overhaul, and so on), non-contact measurement, to ensure safe operation. It is small, with high precision, stable performance, can be connected with phase detection analyzer, industrial control equipment, data recorder, oscilloscope, electric power quality analyzer, high precision multi-meter. The sensor is widely applied in those fields as electricity, communications, meteorology, railroad, car industry, oilfield, construction, measurement, scientific & research teaching institutes, industrial and mining establishments. |
Ⅱ.TECHNICAL SPECIFICATION
Function | Measurement of AC/DC current, leakage current |
Power Supply | Zn-Mn dry battery, 6RL61, 9V. Continually using for 100 hours, connecting external power supply is also available for long time using. |
Test Mode | Clip-on CT, non-contact measurement |
Clamp Size | 16*18mm |
Input Range | 0mA-60.0A AC/DC |
Output Voltage | 10mV/A;100mV/A(corresponding) |
Output Range | 1V peak max |
Resolution | 1mA AC/DC |
Accuracy | ±3%FS(23°C±5°C, below 5%rh) |
Phase Error | ≤3°(AC 50Hz/60Hz; 23°C±2°C) |
Calibration | Adjust ZERO to calibrate, eliminate external electric field interference |
Output Wire | Core wire: signal positive output; shielding wire: signal ground |
Lead length | 2m |
Dimension | LWH: 168mm×65mm×34mm |
Frequency | AC: 45Hz-400Hz |
DC: DC-100kHz | |
Test Position | Tested wire in the jaw center |
Line Voltage | AC600V |
Weight | 170g (Including the battery) |
Working Current | 5mA |
Working Temperature and Humidity | -10°C-50°C,below 80%rh |
Limit Temperature Error | -10°C-0°C and 40°C-50°C, within 2%rdg |
Storage Temperature and Humidity | -10°C-60°C,below 70%rh |
Insulating Strength | AC3700V/rms (between the alloy of the clamp and the housing) |
Applicable safety rules | IEC1010-1, IEC1010-2-032, Pollution level 2, CAT Ⅲ(600V) |
Accessories | Sensor: 1piece; Battery(6F22,9V): 1piece; User Manual/Warranty card/ Certification: 1 copy |
Ⅱ.TECHNICAL SPECIFICATION
Function | Measurement of AC/DC current, leakage current |
Power Supply | Zn-Mn dry battery, 6RL61, 9V. Continually using for 100 hours, connecting external power supply is also available for long time using. |
Test Mode | Clip-on CT, non-contact measurement |
Clamp Size | 16*18mm |
Input Range | 0mA-60.0A AC/DC |
Output Voltage | 10mV/A;100mV/A(corresponding) |
Output Range | 1V peak max |
Resolution | 1mA AC/DC |
Accuracy | ±3%FS(23°C±5°C, below 5%rh) |
Phase Error | ≤3°(AC 50Hz/60Hz; 23°C±2°C) |
Calibration | Adjust ZERO to calibrate, eliminate external electric field interference |
Output Wire | Core wire: signal positive output; shielding wire: signal ground |
Lead length | 2m |
Dimension | LWH: 168mm×65mm×34mm |
Frequency | AC: 45Hz-400Hz |
DC: DC-100kHz | |
Test Position | Tested wire in the jaw center |
Line Voltage | AC600V |
Weight | 170g (Including the battery) |
Working Current | 5mA |
Working Temperature and Humidity | -10°C-50°C,below 80%rh |
Limit Temperature Error | -10°C-0°C and 40°C-50°C, within 2%rdg |
Storage Temperature and Humidity | -10°C-60°C,below 70%rh |
Insulating Strength | AC3700V/rms (between the alloy of the clamp and the housing) |
Applicable safety rules | IEC1010-1, IEC1010-2-032, Pollution level 2, CAT Ⅲ(600V) |
Accessories | Sensor: 1piece; Battery(6F22,9V): 1piece; User Manual/Warranty card/ Certification: 1 copy |
Sensor: 1piece; Battery(6F22,9V): 1piece; User Manual/Warranty card/ Certification: 1 copy