MEWOI5300-Three Phase Digital Phase Volt-Ampere Meter

Email：mewoi@mewoi.com

Whatsapp: +8618620373879

INTRODUCTION

Click to download: MEWOI5300 User Manual

The MEWOI5300 Three Phase Digital Phase Volt-Ampere Meter is a well-developed full-automatic, multi-functional, digital, intelligent meter specifically designed for field testing, featuring high accuracy, high stability, low power consumption, easiness to use and so on. It can directly measure AC voltage and AC current without opening the measured circuit, phases between three voltages, three currents and phase between the voltage and current; in addition, the power factor and power of the circuit can be indirectly measured, it can also be used to distinguish three-phase sequence, transformer wiring group, inductive and capacitive circuits, test second circuit and bus differential protection systems, read the phase relationship between CTs of the differential protection, check the meter wiring right, repair lines and equipment, etc.
The MEWOI5300 Three Phase Digital Phase Volt-Ampere Meter has well designed shell mould made of newest material, attach with shakeproof, skidproof, high insulation sheath, has a 240dots×160dots LCD screen, all the test data display on the screen simultaneously, vector diagram indication, and looks exquisite and comfortable. Meter equipped with USB-RS232 interface, can store 1500 sets of data, through the system software upload stored data to the computer, implementing online real-time monitoring and historical inquires, dynamic display. Can read, save, report, print history data, etc.
The MEWOI5300 Three Phase Digital Phase Volt-Ampere Meter (Intelligent Three Phase Digital Phase Volt-Ampere Meter) applies to electric power, petroleum chemical industry, metallurgy, railway, and meteorology, industrial and mining enterprises, scientific research institutions, measurement sector and so on. Especially for the electricity billing system and relay protection system.

TECHNICAL SPECIFICATION

1．Base Conditions and Working Conditions

Influence Quantity	Base Condition	Working Condition	Remark
Ambient Temperature	23℃±1℃	-10℃～40℃	----
Ambient Humidity	40%～60%	＜80%	----
Signal Waveform	sine wave	sine wave	β=0.01
Signal Frequency	50HZ±1HZ	45HZ～65HZ	----
Meter Working Volt	9V±0.1V	9V±1.5V	----
Current Amplitude in Phase/Frequency/Phase SequenceTest	1A±0.2A	2mA～20A	----
Voltage Amplitude in Phase / Frequency/ Phase Sequence Test	100V±20V	10V～600V	----
Current Amplitude in Power / Power Factor Test	1A±0.2A	20mA～20A	----
Voltage Amplitude in Power / Power Factor Test	100V±20V	10V～600V	----
External Electric Magnetic Field	To be avoided
Measured Wire Position	Measured wire at approximately the geometric center of the clamp

2．Intrinsic Error and Performance Indicators under Base Conditions

Category	Measurement Range	Resolution	Intrinsic Error
Voltage	AC 0.0V～600V	0.01V	±(1.5%rdg+3dgt)
Current	AC 0.0mA～20.0A	0.1mA	±(1.5%rdg+3dgt)
Phase	0.0°～360°	0.1°	±1°
Active Power	0.0W～12kW	0.1W	±(3%rdg+3dgt)
Reactive Power	0.0VAR～12kVAR	0.1VAR	±(3%rdg+3dgt)
Apparent Power	0.0VA～12kVA	0.1VA	±(3%rdg+3dgt)
Frequency	45HZ～65HZ	0.01HZ	±(2%rdg+3dgt)
Power Factor	-1～+1	0.001	±0.03

APPLICATION:

SELECTION GUIDE

Digital Phase Volt-AMP Meter

Click "Blue"Marked model number to view the Detailed Specification

Model	Range	Resolution	Clamp Quantity&Size	RS232	Data Storage
MEWOI5000B	AC：0.00 V～600V (automatic shift),AC：0.0mA～20.0A (automatic shift),Phase：0～360°,Active Power：0.0W～12kW	AC 0.01V,AC 0.1mA,Phase：0.1°	2pc*φ7.5mm	√	1500sets
MEWOI5200B	AC：0.00 V～600V (automatic shift),AC：0.0mA～20.0A (automatic shift),Phase：0～360°,Active Power：0.0W～12kW	AC 0.01V,AC 0.1mA,Phase：0.1°	2pc*φ40mm	√	1500sets
MEWOI5300	AC：0.00 V～600V (automatic shift),AC：0.0mA～20.0A (automatic shift),Phase：0～360°,Active Power：0.0W～12kW	AC 0.01V,AC 0.1mA,Phase：0.1°	3pc*φ7.5mm	√	500sets
MEWOI5700	AC：0.00 V～600V (automatic shift),AC：0.0A～400A (automatic shift),Phase：0～360°,Active Power：0.0W～240kW	AC 0.01V,AC 0.1A,Phase：0.1°	3pc*φ40mm	√	500sets

General Specification

Function	Simultaneous measurement of three-phase AC voltage, current, phase between voltage, phase between current, phase between voltage and current, frequency, phase sequence, active power, reactive power, apparent power, power factor, current vector sum, distinguish transformer wiring group, inductive and capacitive circuits, test second circuit and bus differential protection systems, read the phase relationship between CTs of the differential protection, check the meter wiring right, repair lines and equipment, etc.
Power	DC9V alkaline batteries（1.5V AA×6）
Consumption	About 80mA at most with enabled backlight, battery working continuously for about 10 hours
Consumption	About 5mA with disabled backlight, battery working continuously for about 16 hours
Display Mode	LCD display, 240dots×160dots
Meter Size	Length, Width, Height：196mm×92mm×54mm
Clamp Size	acuminate current clamp:7.5mm×13mm
Measurement Range(automatic shift)	AC Voltage：0.00 V～600V (automatic shift)
	AC Current：0.0mA～20.0A (automatic shift)
	Phase：0～360°
	Frequency：45.00Hz～65.00Hz
	Active Power：0.0W～12kW
	Reactive Power：0.0W～12kVAR
	Apparent Power：0.0W～12kVA
	Power Factor：-1～+1
	Current Vector Sum：0mA～60.0A
Resolution	Voltage：AC 0.01V
	Current：AC 0.1mA
	Phase：0.1°
	Frequency：0.01Hz
	Active Power：0.1W
	Reactive Power：0.1VAR
	Apparent Power：0.1VA
	Power Factor：0.001
	Current Vector Sum：1mA
Phase Sequence	Positive Phase Sequence：U1、U2、U3 or I1、I2、I3 cursors blink in order from left to rightNegative Phase Sequence：U1、U2、U3 or I1、I2、I3 cursors blink in order from right to left
Sample Rate	About 2 times/second
Data Hold	Press HOLD key to keep data, "DH" symbol appears
Data Storage	500 sets
RS232 Interface	USB-RS232 interface, download data to computer for analysis and management
Automatic Shutdown	Automatic shutdown about 15 minutes later after launching to reduce battery consumption
Backlighting	Suitable for dark place and nightly use
Voltage Detection	Low battery symbol appears to remind the replacement of battery when the battery voltage drops below 7.2V.
Weight	Main Unit about 550g(with battery), acuminate current clamp about 170g×3, round current clamp about 185g×3, test line about 250g
Test Line Length	1.5m
Current Clamp Length	2m×φ5mm
Working Temperature and Humidity	-10℃～40℃； below 80%Rh
Storage Temperature and Humidity	-10℃～60℃； below 70%Rh
Input Impedence	Testing voltage the input impendence is 2MΩ
Withstand Voltage	Withstand 1000V/50Hz sine wave AC voltage for 1 minute between the meter lines and shell; Withstand 500V/50Hz AC voltage sine wave for 1 minute between the two voltage inputs
Insulation	≥100MΩ between meter lines and shell or between the two voltage inputs
Structure	Double insulation, with insulation vibration-proof sheath
Safety Specifications	IEC61010-1 CAT Ⅲ 600V, IEC61010-031, IEC61326, 2 class of pollution
Accessories	Main Unit: 1 pc; Meter Box: 1 piece; Current Clamp: 3 pcs; Test Line: 4 pcs(yellow, green, red, black); RS232 Data Line: 1 pc; Disk: 1 pc; Battery: 6 pcs(alkaline dry battery: 1.5V AA); User Manual: 1 pc ; Guarantee Card: 1 pc; Certification: 1 pc.

Main Unit: 1 pc; Meter Box: 1 piece; Current Clamp: 3 pcs; Test Line: 4 pcs(yellow, green, red, black); RS232 Data Line: 1 pc; Disk: 1 pc; Battery: 6 pcs(alkaline dry battery: 1.5V AA); User Manual: 1 pc ; Guarantee Card: 1 pc; Certification: 1 pc.