| Contactez-nous pour un devis | Courriel：mewoi@mewoi.com | WhatsApp : +8618620373879 |
Mini pince MEWOI130BE sur sonde /mètre de capteur de courant ca/cc 0mA ~ 60A
Ⅰ.Introduction
| Le capteur de courant AC/DC à pince MEWOI130BE est spécialement conçu pour tester le courant et la fuite du circuit en dessous de AC/DC60A, principalement utilisé pour le courant de fuite AC et DC, le courant, la phase, l'énergie, la puissance, le facteur de puissance et d'autres tests,avec une petite taille, grande précision et bonne stabilité. Il est largement appliqué dans la mesure des fuites de courant alternatif, du courant, de la puissance et de l'énergie avec une haute précision et une petite erreur de phase de l'électricité, des communications, de la météorologie, des chemins de fer, des champs pétrolifères, de la construction, de la mesure, de l'unité d'enseignement scientifique et de recherche, des entreprises industrielles et minières, qui peut être connecté à une variété de multimètres numériques de haute précision et d'enregistreurs de données. |
Cliquez pour télécharger: Manuel d'utilisation MEWOI130BE
Cliquez pour télécharger : Carte de sélection
Spécifications techniques
Fonction | AC and DC leakage current, current, phase, energy, power, power factor and other testing |
Power Supply | Battery, 6LR61 9VDC (can connect external power supply) |
Test model | Clamp CT, Non contact measurement, non-exposure of meter of the jaw |
Dimension | 175mm×70mm×38mm |
Clamp Size | 25mm×30mm |
AC Frequency | 45~400Hz |
Range | AC/DC 0mA~60A |
Resolution | 1mA |
Accuracy | 1%(23℃±3℃,below 70%RH) |
Output | 10mV/1A ,0～60A,0～600mV DC/AC |
Frequency Response | 10KHz(-3dB) |
Zero-Adjustment | Yes |
Lead length | 2m |
Wire Position | Detected wire should be put on the centre of the jaw |
Circuit Voltage | Lower than AC600V |
Power on/off | Push ON/OFF key |
Battery Voltage | Indicating the battery voltage is lower then 7.2V.Then the battery have to be changed |
Weight | 180g(including the battery) |
Consumption | 20mA Max |
Auto Power-off | 5 Minutes after power on, it will power off automatically to lower the power consumption |
Working environment | -20℃~50℃;below 80%rh |
Storage environment | -10℃~60℃;below 70%rh |
Max error refer to environment | -10℃~0℃ or 40℃~50℃,Error will increase max to 1%rdg |
Insulation strength | AC 3700V/rms (between core and shell) |
Safety rules | IEC1010-1, IEC1010-2-032, Pollution degree 2,CAT Ⅲ(600V) |
Accessories | Sensor:1PC; Battery (6F22 9V): 1PC |
Ⅱ.Application
SELECTION GUIDE 1
Clamp on Current Sensor Probe For Terminals Such Mulitimeter&Oscilloscope
Click "Blue" marked Model No. to View the Spec
| Model | Range | Resolution | Clamp Size | Power Supply&output | Hall effect | Current induction output,Direct Coil tap | Others |
MEWOI107BE | 0mA~60A (AC/DC) | 1mA | Φ7mm | Power Supply: 9VDC, Output:10mV/A,100mV/A, Accuracy 3% | √ | Suitable for small spaces AC / DC leakage current, low current test. | |
MEWOI108 | 0.0mA~30A (AC) | 0.1mA, Accuracy 0.5% | Φ8 mm | √ | Suitable for small spaces AC leakage current, harmonic, phase, Power test | ||
MEWOI130 | 0.000mA~60A (AC), | 0.001mA,Accuracy: 1% | 25*30mm | √ | Double shielding, anti-jamming capability,suitable for leakage current,small current test. | ||
MEWOI130E | 0.00A~10A (DC), | 0.01A | 25*30mm | Power supply: 9VDC, output:0~2.5mV/10mA,Accuracy: 3%，Turns ratio：1:800 | Double shielding, anti-jamming capability,suitable for small DC current test. | ||
| MEWOI130E2 | 0.0mA ~100mA (DC), | 0.1mA | 25*30mm | Power supply: 9VDC, output:0~2.5mV/1mA,Accuracy: 3%，Turns ratio：1:800 | Double shielding, anti-jamming capability,suitable for DC leakage current test. | ||
MEWOI130BE | 0mA~60A (AC/DC) | 1mA | 25*30mm | Power supply: 9VDC, output:10mV/A，100mV/A,Accuracy: 2% | √ | suitable for AC/DC current test | |
MEWOI135BE | 0.0A~1000A (AC/DC) | 0.1A | 30*35mm | Power supply: 9VDC, output:1mV/1A,Accuracy: 2% | √ | suitable for AC/DC current test | |
MEWOI140 | 0.00mA ~300A (AC) Turn Ratio 1:2400 | 0.01mA,Accuracy: 1% | 35*40mm | √ | Single shielding, suitable for leakage current, small current test | ||
| MEWOI140B | 0.0A~600A (AC) Turn Ratio 1:4000 | 0.1A, Accuracy: 1% | 35*40mm | √ | suitable for big current test | ||
MEWOI140C | 0.0mA ~100A (AC) Turn Ratio 1:2000 | 0.1mA, Accuracy: 1% | 35*40mm | √ | suitable for current, harmonic, phase, Power test | ||
MEWOI168 | 0.00mA ~1000A (AC) | 0.01mA, Accuracy: 1% | Φ68mm | √ | Double shielding, anti-jamming capability,suitable for leakage current, current test | ||
MEWOI168B | 0.0A~2000A (AC) | 0.1A, Accuracy: 2% | Φ68mm | √ | suitable for current, harmonic, phase, Power test | ||
MEWOI168C | 0.00A~1000A (AC) | 1mA, Accuracy: 2% | Φ68mm | √ | suitable for current, harmonic, phase, Power test | ||
MEWOI168BE | 0.0A~2000A (DC), 0.0A~1000A(AC) | 0.1mA | Φ68mm | Power supply: 9VDC, output:1mV/1A, Accuracy: 2% | √ | suitable for AC/DC big current test |
SELECTION GUIDE 2
Flexible Coil Current Sensor Probe For Terminals Such as Mulitimeter&Oscilloscope
Cliquez sur le numéro de modèle marqué " bleu " pour afficher les spécifications
| Modèle | TDM flexible | Gamme | Résolution | Longueur de bobine | Diamètre | Application |
MEWOI200G | Φ100 millimètres | Un C 10mA ~ 10000A ~ plus | 10mA | 315mm ( Peut être personnalisé ) | φ7,5 mm (convient aux endroits étroits et à forte intensité de câbles) | Mesurez le courant alternatif élevé, les courants harmoniques élevés, le courant de formes d'onde complexes, le courant transitoire d'appel. Convient pour mesurer la taille d'un courant conducteur important ou de forme irrégulière |
MEWOI300G | Φ200 millimètres | Un C 10mA ~ 10000A ~ plus | 10mA | 630mm ( Peut être personnalisé ) | φ7,5 mm (convient aux endroits étroits et à forte intensité de câbles) | |
MEWOI400G | Φ300 millimètres | Un C 10mA ~ 10000A ~ plus | 10mA | 1000mm ( Peut être personnalisé ) | φ7,5 mm (convient aux endroits étroits et à forte intensité de câbles) |
Technical Specification
Function | AC and DC leakage current, current, phase, energy, power, power factor and other testing |
Power Supply | Battery, 6LR61 9VDC (can connect external power supply) |
Test model | Clamp CT, Non contact measurement, non-exposure of meter of the jaw |
Dimension | 175mm×70mm×38mm |
Clamp Size | 25mm×30mm |
AC Frequency | 45~400Hz |
Range | AC/DC 0mA~60A |
Resolution | 1mA |
Accuracy | 1%(23℃±3℃,below 70%RH) |
Output | 10mV/1A ,0～60A,0～600mV DC/AC |
Frequency Response | 10KHz(-3dB) |
Zero-Adjustment | Yes |
Lead length | 2m |
Wire Position | Detected wire should be put on the centre of the jaw |
Circuit Voltage | Lower than AC600V |
Power on/off | Push ON/OFF key |
Battery Voltage | Indicating the battery voltage is lower then 7.2V.Then the battery have to be changed |
Weight | 180g(including the battery) |
Consumption | 20mA Max |
Auto Power-off | 5 Minutes after power on, it will power off automatically to lower the power consumption |
Working environment | -20℃~50℃;below 80%rh |
Storage environment | -10℃~60℃;below 70%rh |
Max error refer to environment | -10℃~0℃ or 40℃~50℃,Error will increase max to 1%rdg |
Insulation strength | AC 3700V/rms (between core and shell) |
Safety rules | IEC1010-1, IEC1010-2-032, Pollution degree 2,CAT Ⅲ(600V) |
Accessories | Sensor:1PC; Battery (6F22 9V): 1PC |
Sensor:1PC; Battery (6F22 9V): 1PC